Our Services

Brochure

Need help?

Ring Road behind Al Nozha international airport , 21944 – Alexandria – Egypt

Tel: +2 03 4307001 – 2 – 3
Email: info@elnileelevators.com

Our Products

Modernizations

This solution is an example of modernization in which the customer has requested the replacement of the elevator car with automatisms and landing doors.
The doorframes have been customized and bear a smaller size and may differ at each landing as well, according to the demands of the building site, based on what previously installed. The whole has been realized taking into account stairwell aesthetics and system functionality.
The control buttons have been placed on the landing doorframe upright because of its smaller size, which does not allow for the use of a panel. Alternatively, it would have been possible to fix a control panel directly on the wall.
In order to come across specific weight demands, without giving up on aesthetics, the elevator car can be also realized in aluminium panels and flooring in Rocksolid, known for its strength and lightness properties.

Home lift platforms in reduced shaft structures

lift platforms perfectly integrate into the environment in which they are installed and offer a great balance between aesthetics and ease of use.
The access to the lift can be realized:
by means of automatic car and landing sliding doors and automatism;
by means of car folding doors and hinged landing doors and automatism;
featuring no car doors. With a hinged automatic landing door and by means of hold-to-run control system.
It is possible to realize home-lift systems together with a metal shaft structure of the slim type in order not to give up room available within the installation site. Staircase or floor adaptation is also possible.
A structure in transparent glass infill and a panoramic landing door will make the environment brighter. All system accessories are supplied in the same RAL colour as the structure, so as to make it pleasant and in line with the colours of the surrounding environment.
A wide range of handles and windows for landing door applications is definitely worth of noting, while everything is carried out taking full account of stairwell aesthetics and system functionality.

Tailor-made home lift systems

home-lift systems integrate perfectly into the environments in which they are installed and offer a great balance between aesthetics and ease of use.
Access to the lift can be realized:
by means of automatic car and landing sliding doors and automatism;
by means of car folding doors and hinged landing doors and automatism;
without any car doors, but featuring an automatic hinged landing door and hold-to-run control as well.
The wide range of customizations to be realized includes examples of home-lift systems which highlight sophisticated details which meet the most diverse architects and engineers’ fantasy.
You may have noticed from our gallery that IGILift realizes unique handcrafted systems, regarded as home-design components that confer style and elegance to the building in addition to being highly efficient technological machines.
Materials can be the most particular choice: the range varies from bright, polished stainless steel to Corian linearity, or the elegance of leather.
Floors can also enhance lift car aesthetics. The second picture on the left shows an example of a caduceus directly inlaid in Rocksolid flooring.
Customizations include a wide range of mirrors, handrails and lighting as well.

Landing doors and door-frame surrounds

Landing door frames are certainly the first elements that produce an aesthetic impact in a lift, joining system technology and aesthetics with the unique features of each place.

IGILift wide product range includes landing-door frames and landing-doors of any material and size.

Landing door-frame surrounds, a precious architectural cornice, may also be an alternative to old-fashioned marble cladding since the door frame surround can be directly installed on the masonry.

Easy to be fixed, surrounds can be also integrated in the landing frame to become an outstanding cornice, producing this way an impressive visual impact in spacious environments.

Bridge-type lifting systems

Bridge-type systems represent a strong point in IGILift production as, thanks to them, double opposite access in highly reduced shaft structures is possible of being generated.

The system supplied can be either hydraulic or an electric-based gearless one.

Providing pits, overheads and regulatory constraints compatibility, it is possible to realize both hydraulic and MRL gearless motor lift systems in shaft structures as wide as 860 mm wide.

The semi-automatic system is supplied with accessories chosen by the customer and in the same colour as the structure.

Public use lifting systems

The range of products commercialized by also include elevators and lift systems for public use specifically designed for railways and subways or the Underground.

In addition to all various harmonized standards, these systems are realized to also comply with March 9th 2015 DECREE (Provisions relating to the operation of lifts in public service intended for the transport of people), whereby it is required, for instance:

Specific documentation
Lift car roof safety trapdoo
Compliance with EN 81-70 standards.

The materials shall follow specification requirements, compatibly with the standards provisions.

Single-phase 230V systems

Within the wide range of tailor-made products that can be realized, it is essential to include the 230V single phase systems, both hydraulic and MRL.

These systems are designed to meet the needs of the end-customer, who can count on a home-lift system in accordance with the standards, avoiding this way the installation of a three-phase 400V meter.

Generally, these systems are designed to bear a lower speed than the typical 400V system, leaving intact the technological efficiency of the system.

The recommended rated speed for hydraulic home-lifts is 0.35 m/s, while for MRL it is 0.62 m/s.

Thanks to our partnership with EMATIC and the commitment on technological evolution, today we can supply these systems fitted with the NG50 device, a battery pack designed to optimize the management of the system energy demand, leading to a reduction in power consumption.

Panoramic lifts

aesthetic suggestion is certainly the offer of panoramic home-lift systems with one or more sides in full-glass or in a stainless steel frame.

Beside enhancing and enriching the building architecture and its own environment with style and elegance, these home lifts allow the user to turn each travel into a unique emotional experience.

The glass walls can be transparent, milk white, smoked, fumé, bronze, in Stopsol. In addition, the glass of the most particular lift cars can be fitted with micro-led lights in it.

Each wall is protected by means of a handrail or a wall band, that matches the features and the lift car finishes.

The floor can also be made of shatterproof glass with transparent or milk-white finishes or it may feature a drawing by the customer, with backlighting and non-slip texture.

Handmade creations, hand-crafted by skilled workers, blend with highly technological accessories. Noteworthy, for instance, are lift car push-button control panels realized in glass and digital printing supplied by the customer.

Together with different glass types, customers can use the most diverse types of materials, such as stainless steel, Corten metal sheet and calamine sheet.

Electric home-lifts in metal structure

Febo is a fully electric home lift platform with very low power consumption and high energy efficiency.

Febo has been designed to be reliable over time. The gearless choice, instead of standard gearbox motors, enhances the level of the quality-price ratio.

The system has a gearless motor at the top of the hoistway and a small control panel on the top floor which, depending on the choice and conditions of the hoistway, can be integrated into the jamb of the landing doorframe of the highest floor.

Each Febo home-lift platform features an intelligent monitoring system, produced by Ematic, which carries out continuous checks and signals any faults in advance.

As with MRL gearless systems, Febo home lifts can also be equipped with any accessory.

Special realizations

has always been characterised by the construction of special lift systems.

Throughout the many years of activity, we have been able to satisfy the most particular space requirements thanks to consolidated design capacity and expertise.

Examples of this ability and creativity are plants with a triangular, trapezoidal and circular shape.

Therefore, in addition to the use of the most diverse materials, El Nile is able to come across specific needs for lift systems that adapt to any lift hoistway shape. Thanks to the company’s production team, engineers as well as El Nile partners’ support, any system requiring a particular shape can be built.

Structures for outdoor use

A definitely important note in the implementation of El Nile systems is the continuous updating to the latest standards, thus also the metal shaft structures are in compliance with EN 1090 with a manufacturing process which meets the most stringent quality requirements.

El Nile offers its customers:

Structures suitable for indoor and outdoor installations;

Structures suitable for coastal areas / maritime locations;

Possible stiffening tie-rods in steel wire.

For all the structures, RAL colouring has no limits and the infill can be realized in blind panels of the same colour, insulated panels, transparent, milk white, fumé, grey, bronze or Stopsol safety glass, with or without studs to the creativity of clients and architects.

Shaft structures in transparent glass, supplied together with the lift, have all internal components painted in the same colour so as to constantly bear an ideal aesthetic impact.

Indoor structures

El Nile offers its customers:

Structures suitable for indoor and outdoor installations;

Slim structures for reduced space shafts;

Structures suitable for coastal areas / maritime locations.

Shaft structures in transparent glass, supplied together with the lift, have all internal components painted in the same colour so as to constantly bear an ideal aesthetic impact.

In case of reduced space shafts, it is also possible to realize landing door-frames that stand slightly forward (compared to the rest of the structure, which fits in tightly within the staircase hoistway) on the landing floor so as to increase the space inside the elevator car.

Plants

Metal shaft structures for interior and exterior use (RAL, INOX)

Standard, Slim for space saving, with external glass or binding screws.

Infill realised in painted metal sheet, skin-plate (plastic-coated sheet), stainless steel sheet, insulation panelling, glass or upon request.

Hydraulic lifts EN 81.2 – EN 81.20/50

Rucksack type, rated load capacity up to 2400 Kg.

Plant types: central direct-acting; side direct-acting; indirect acting (or roping) 2:1

Electric lifts with machine room EN 81.1 – EN 81.20/50

Sling car frame, with a rated load capacity up to 2000 Kg and rated speed up to 2.5m/s.

Plant types: direct acting; indirect acting 2:1 with upward/downward diverter pulley; motor support supply.

MLR electric lifts EN 81.1- EN 81.20/50

Direct acting, rucksack frame Pegaso NARROW with 440 mm D.B.G. (rated load capacity up to 320 kg and rated speed of 1m/s).

Direct acting, rucksack frame Pegaso 1:1 (rated load capacity up to 630 kg and rated speed of 1m/s).

Indirect acting, rucksack frame Pegaso 2:1 (rated load capacity up to 1600 kg and rated speed of 1m/s).

Indirect acting, sling frame Pegaso DUE (rated load capacity up to 2000 kg and rated speed of 2m/s).

Indirect acting, sling frame Pegaso DUE (rated load capacity up to 2500 kg and rated speed of 1.6m/s).

EN 81.21 reduced pit, reduced headroom lift plants

Hydraulic lifts: minimum pit of 200*mm, minimum headroom of 2400*mm (rated load capacity up to 2000 Kg).

Electric lifts with machine room: minimum pit of 350*mm.

MRL electric lifts: minimum pit of 250*mm, minimum headroom of 2400*mm and rated load capacity up to 1000 kg.

Machinery Directive home-lifts 2006/42 EC

Mercury: hydraulic homelift (rated load capacity up to 1000 kg and rated speed of 0.15 m/s for EC plants; 0.30 m/s for non-EC plants).

Febo: MRL electric homelift (rated load capacity up to 500 Kg and approx. 0.5 KW, as well as rated speed of 0.15 m/s for EC plants; 0.3

m/s for non-EC plants).

Refurbishment kit

Kit Simplex: designed for the refurbishment of old electric lifts.

“Cabina Piuma”: a lightweight cabin, with panels in aluminium measuring 800 x 1200 mm, complete with door. Total weight: 160 Kg.

Space saving lifts for narrow hoist-ways

“Ponte oleo” hydraulic lift with a shaft structure outer dimensions of 770 mm.

“Ponte elettrico MRL” electric lift with shaft structure outer dimensions of 760 mm.

Hydraulic “400 mm D.B.G.”, for hoist-ways with shaft structure outer dimensions of 660 mm.

“MRL Pegaso Narrow”, for hoist-ways with shaft structure outer dimensions of 690 mm.

“MRL Pegaso Ultraslim” lift with car frame dimensions of 235 mm.

“FTR1 Slim” hydraulic lift with car frame dimensions of 180 mm.

Special lift plants

Panoramic lifts

Lifts for the food sector (AISI 316L steel)

Lifts for applications in public transport facilities (underground, subways, train stations)

Fire-fighters and rescue lifts (Italian M.D. 15/09/2005)

Fire-fighters lifts (EN 81.72)

Cabins: standard – tailor-made – panoramic – special shape (upon request) and lightweight.

Landing doors, door-frames and surrounds (windowless, coated, framed glass and full glass)

* The minimum height measurements vary according to plant design specifications (lift plant type, rated speed and load capacity).

The above lift plants are our standard range of products. For specific demands, CMAlifts shall assess relevant project feasibility.
All lift plants can be realized according to EN 81.70 – Italian M.D. 236/89 (Law 13), with 230V single-phase power supply.

Our